dual sim 4g router -ag贵宾会

mobile

mobile module

4g (lte) – cat 4 up to 150 mbps downlink, 50mbps uplink

4g (lte) – cat 1 up to 10 mbps downlink, 5mbps uplink

status

signal strength (rssi), attached network, imsi, iccid

apn

auto apn, customized apn

wireless

wireless mode

ieee 802.11b/g/n, access point (ap)

wifi security

wpa2-psk, wep, wpa-eap, wpa-psk; aes-ccmp, tkip, auto cipher modes, client separation

ssid

ssid stealth mode and access control based on mac address

wifi users

up to 30 simultaneous connections

physical interface

wan

1 x wan port (can be configured to lan) 10/100 mbps, compliance with ieee 802.3, ieee 802.3u standards, supports auto mdi/mdix

lan

4 x lan port, 10/100 mbps, compliance with ieee 802.3, ieee 802.3u standards, supports auto mdi/mdix

serial

1 x rs232/rs485 db9 port (2-tx, 3-rx, 5-gnd)

sim

2 standard sim card slots,1.8 v/3 v, external sim holder

antenna

2 x sma for lte, 1 x sma for wifi antenna connectors

led

3 x signal strength leds, 5 x ethernet status leds, 1 x run status led,1 x power led,1 x vpn status led, 1 x wifi status led

reset

reboot/factory reset button

network

routing

static routing, dynamic routing (bgp, ospf v2, rip v1/v2, ripng, ospf6)

network protocols

tcp, udp, ipv4, ipv6, icmp, ntp, dns, http, tls, arp, vrrp, ppp, pppoe, upnp, ssh, dhcp, telnet client, snmp

connection monitoring

ping reboot, periodic reboot, lcp and icmp for link inspection

firewall

port forwarding

dhcp

static and dynamic ip allocation, dhcp relay

qos

traffic priority queuing by source/destination, service, protocol or port

supported >25 service providers, others can be configured manually

network backup

vrrp, mobile and wired, each of which can be used as backup, using automatic failover

security

attack prevention

ddos prevention (syn flood protection, ssh attack prevention, http/https attack prevention)

vlan

port and tag based vlan separation

web filter

blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

access control

flexible access control of tcp, udp, icmp packets, mac address filter

vpn

openvpn

multiple clients can be running simultaneously, 10 encryption methods

openvpn encryption

des-cbc, rc2-cbc, des-ede-cbc, des-ede3-cbc, desx-cbc, bf-cbc, rc2-40-cbc, cast5-cbc, rc2-64-cbc, aes-128-cbc, aes-192-cbc, aes-256-cbc

ipsec

ikev1, ikev2, supports up to 10 x vpn ipsec tunnels (instances), with 5 encryption methods (des, 3des, aes128, aes192, aes256)

gre

gre tunnel

pptp, l2tp

client/server services can run simultaneously

serial transmission

tcp/udp server

parameters

port, baud rate, parity, data bits, stop bits, flow control

tcp/udp client

parameters

port, baud rate, parity, data bits, stop bits, flow control, heartbeat

data center

supported 4 server run simultaneously

monitoring & management

web ui

http, status, configuration, fw update,troubleshoot, event log, system log, kernel log

fota

firmware update from sever, automatic notification

snmp

snmp (v1, v2, v3)

iot platforms

cloud of things

allows monitoring network info, availability

configure

configure parameters, update firmware

system characteristics

cpu

broadcom, 600 mhz

ram

64 mb, ddr2

flash storage

16 mb, spi flash

firmware / configuration

web ui

update fw from file, check fw on cloud, configuration backup and restore

fota

update fw/configuration from cloud platform

rms

update fw/configuration for multiple devices

keep settings

update fw without losing current configuration

power

connector

1 industrial dc power socket

input voltage range

9 – 36 vdc, reverse polarity protection, surge protection

poe (option)

passive poe over spare pairs (available from hw revision 0007 and batch number 0010). possibility to power up through lan port, not compatible with ieee802.3af, 802.3at and 802.3bt

power consumption

< 5 w max

physical specification

casing material

metal housing

dimensions (w x h x d)

200 x 117.5 x 32.7 mm

weight

130 g

operating environment

operating temperature

-40 °c to 75 °c

operating humidity

10% to 90% non-condensing

ingress protection rating

ip30

regulatory & type approvals

regulatory

ce, fcc, ccc

emi immunity

standards

draft en 301 489-1 v2.2.0, draft en 301 489-17 v3.2.0, draft en 301 489-52 v1.1.0
fcc 47 cfr part 15b (2017), ansi c63.4 (2014)

esd

en61000-4-2:2009

rs

en 61000-4-3:2006 a1:2008 a2:2010

eft

en 61000-4-4:2012

surge immunity (ac power line)

en 61000-4-5:2006

surge immunity (ethernet ports)

en 61000-4-5:2014, clause 7.1 of itu-t k21

cs

en 61000-4-6:2009

dip

en 61000-4-11:2004

rf

standards

en 300 328 v2.1.1, en 301 511 v12.5.1, en 301 908-1 v11.1.1, en 301 908-2 v11.1.1, en 301 908-13 v11.1.1
fcc 47 cfr part 15c (2017), fcc 47 cfr part 2 (2017), fcc 47 cfr part 22h (2017), fcc 47 cfr part 24e (2017), fcc 47 cfr part 27c (2017)
rss-gen issue 4 (2014), rss-247 issue 2 (2017), rss-132 issue 3 (2013), rss-133 issue 6 (2013), rss-139 issue 3, rss-130 issue 1
as/ca s042.1:2018, as/acif s042.3:2005, as/ca s042.4:2018, as/nzs 4268:2017

hardware specifications

● support public and private apn network

● dual sim ensures that a backup 3g/4g network can take over should the primary network fail. the router detects a network problem and fails over to a standby sim/apn, ensuring the customer’s slas are upheld.

● dedicated hardware and software watchdog are designed to support system running reliable.

●icmp detection and heartbeat detection ensure the router to be always on line.

● full support for ipv4 and ipv6 network technology.

●reboot the routerremotely via sms.

● offers business grade security and advanced routing features ipsec (3des and aes), l2tp, pptp, gre as standard.

● incorporate virtual router redundancy protocol (vrrp), facilitating 3g/4g wan backup services to existing fixed line routers, providing both wan and router redundancy to critical business applications.

● low-voltage, over current, over voltage, anti-reverse protection

● wide power input dc7-36v

● standard rs232/485 interface to connect with serial devices.

● router factory default settings can be configured freely.

● system logs can be viewed from local or remote.

●support wlan(300mbps 802.11b/g/n).

● support snmp v1/v2/v3.

● support ip, mac, url filtering

●nat and qos are supported

● support static, dynamic, and policy-based routing strategy

● leds for status monitoring (showing power, system, internet, vpn, signal strength).

● supports ntp client synchronization network time and provides ntp network time.

● support router local web access control.

cpu

●ram:512mbit    flash:128mbit

power input

● input dc 7-36v(standard dc12v)

environment

● storage temperature：-40℃～80℃

● work temperature：-35℃～75℃

● humidity：<95%

dimension

● unit size l*w*h：200*117.5*32.7mm

● metal shell, ip30

● package weight:830g

interface

● 1 sim card slot

● 1 wan/lan 10/100mb rj45 port

● 1 lan 10/100mb rj45 port

● 1 rs232 or rs485 serial port

antenna(female)

● ant1, 2 for cellular

● ant3 for wifi

emc test

● electrostatic discharge immunity：en6100-4-2, level 2

● rfems：en6100-4-3, level 2

● surge：en6100-4-3, level 2

● pfmf：en6100-4-6, level 2

● shockwave immunity：en6100-4-8, horizontal / vertical direction 400a/m(>level 2)

physical property

● shockproof：iec60068-2-27

● drop test：iec60068-2-32

● vibration test：iec60068-2-6

model

frequency & band

bandwidth(ul/dl)

consumption

wifi (-w)

serial(-s)

rd58a

(cat6, america network)

● fdd-lte: 2100mhz(b1),1900mhz(b2), 1800mhz(b3), aws(b4), 850mhz(b5), 2600mhz(b7),700mhz(b12),700mhz(b13), 800mhz(b20), 1900mhz(b25) , 850mhz(b26), 700mhz(b29), 2300mhz(b30),

● tdd-lte: 2500mhz(b41)
● umts/hspa : 2100mhz(b1), 1900mhz(b2),1800mhz(b3), 1700mhz(b4), 850mhz(b5), 900mhz(b8)

fdd-lte:

50mbps/300mbps

dc hspa :

5.76mbps/42mbps

work:

0.46a@12v dc

peak:

0.58a@12v dc

option

option

-s2--rs232

-s4--rs485

rd58c

(asia network)

● fdd-lte: 2100mhz(b1), 1800mhz(b3), 900mhz(b8)

● tdd-lte: 2600mhz(b38), 1900mhz(b39), 2300mhz(b40), 2500mhz(b41)
● umts/hspa : 2100mhz(b1), 850mhz(b5), 900mhz(b8), 1800mhz(b9)

● td-scdma: b34, b39

fdd-lte:

50mbps/150mbps

tdd-lte:

10mbps/112mbps

dc hspa :

5.76mbps/42mbps

work:

0.41a@12v dc

peak:

0.50a@12v dc

rd58e (europe & asia network)

● fdd-lte: 2100mhz(b1), 1800mhz(b3), 850mhz(b5), 2600mhz(b7), 900mhz(b8), 800mhz(b20)

● tdd-lte: 2600mhz(b38),1900mhz(b39), 2300mhz(b40), 2500mhz(b41)
● umts/hspa : 2100mhz(b1), 1900mhz(b2), 850mhz(b5), 800mhz(b6), 900mhz(b8),

fdd-lte:

50mbps/150mbps

tdd-lte:

10mbps/112mbps

dc hspa :

5.76mbps/42mbps

work:

0.41a@12v dc

peak:

0.50a@12v dc

rd58g

(australia)

● fdd-lte: 2100mhz(b1),1900mhz(b2), 1800mhz(b3), aws(b4), 850mhz(b5), 2600mhz(b7),900mhz(b8), 700mhz(b28),

● tdd-lte: 2300mhz(b40)
● umts/hspa : 2100mhz(b1), 1900mhz(b2), 850mhz(b5), 900mhz(b8)

fdd-lte:

50mbps/300mbps

dc hspa :

5.76mbps/42mbps

work:

0.41a@12v dc

peak:

0.50a@12v dc

rd58j

(cat6, japan &korea network)

● fdd-lte: 2100mhz(b1), 1800mhz(b3), 850mhz(b5), 2600mhz(b7), 900mhz(b8), 800mhz(b18), 800mhz(b19), 1500mhz(b21), 700mhz(b28),

● tdd-lte: 2600mhz(b38), 1900mhz(b39), 2300mhz(b40), 2500mhz(b41)

● wcdma: 2100mhz(b1), 850mhz(b5), 850mhz(b6), 900mhz(b8), 1700mhz(b9), 850mhz(b19)

● td-scdma: b39

fdd-lte:

50mbps/300mbps

tdd-lte:

10mbps/112mbps

dc-hspa : 5.76mbps/42mbps

work:

0.46a@12v dc

peak:

0.58a@12v dc