ther88 series industrial 5g wireless routers are independently developed by yinghua to support the 5th generation mobile communication technology. they have enhanced functions such as high speed, large capacity, and low latency. compared with 4g networks, the transmission rate is increased by 10 to 100 times. the equipment uses qualcomm's ipq4019 chip, built-in industrial-grade 5g module, and integrates gigabit ethernet port wan, lan and 2.4ghz and 5ghz wifi. the 5g network supports sub6 full band coverage. the theoretical peak rate can reach 2.5gpbs, while supporting 5g/4g/3g, supporting nsa and sa modes, supporting 5g and lte-a multiple network standards, and adapting to the network conditions of different operators to achieve a seamless upgrade from 4g to 5g. wifi provides 2.4ghz and 5ghz dual-band wireless signals.
mobile
mobile module
5g sa sub-6 – 2.1 gbps downlink; 900 mbps uplink
5g nsa sub-6 – 2.5 gbps downlink; 650 mbps uplink
4g (lte) – 1 gbps downlink; 200 mbps uplink
status
signal strength (rssi), attached network, imsi, iccid
apn
auto apn, customized apn
wireless
wireless mode
ieee 802.11b/g/n/ac, wave 2 (wifi 5) with data transmission rates up to 1200 mbps (2.4ghz & 5.8ghz dual band), access point (ap)
passive poe over spare pairs (available from hw revision 0007 and batch number 0010). possibility to power up through lan port, not compatible with ieee802.3af, 802.3at and 802.3bt
power consumption
< 23 w max
physical specification
casing material
metal housing
dimensions (w x h x d)
200 x 141 x 28 mm
weight
520 g
operating environment
operating temperature
-40 °c to 75 °c
operating humidity
10% to 90% non-condensing
ingress protection rating
ip30
regulatory & type approvals
regulatory
ce, fcc, ccc
emi immunity
standards
draft en 301 489-1 v2.2.0, draft en 301 489-17 v3.2.0, draft en 301 489-52 v1.1.0 fcc 47 cfr part 15b (2017), ansi c63.4 (2014)
esd
en61000-4-2:2009
rs
en 61000-4-3:2006 a1:2008 a2:2010
eft
en 61000-4-4:2012
surge immunity (ac power line)
en 61000-4-5:2006
surge immunity (ethernet ports)
en 61000-4-5:2014, clause 7.1 of itu-t k21
cs
en 61000-4-6:2009
dip
en 61000-4-11:2004
rf
standards
en 300 328 v2.1.1, en 301 511 v12.5.1, en 301 908-1 v11.1.1, en 301 908-2 v11.1.1, en 301 908-13 v11.1.1 fcc 47 cfr part 15c (2017), fcc 47 cfr part 2 (2017), fcc 47 cfr part 22h (2017), fcc 47 cfr part 24e (2017), fcc 47 cfr part 27c (2017) rss-gen issue 4 (2014), rss-247 issue 2 (2017), rss-132 issue 3 (2013), rss-133 issue 6 (2013), rss-139 issue 3, rss-130 issue 1 as/ca s042.1:2018, as/acif s042.3:2005, as/ca s042.4:2018, as/nzs 4268:2017
● adsl(wan port supports pppoe, dhcp, static ip) and 5g/4g backup. the router detects a network problem and fails over to a standby 5g/4g, ensuring the customer’s slas are upheld.
● dedicated hardware and software watchdog are designed to support system running reliable.
●strong vpn firewall offers connectivity, security and remote access to both local and remote clients.
● full support for ipv4 and ipv6 network technology.
●reboot the routerremotely via sms.
● offers business grade security and advanced routing features ipsec (3des and aes), l2tp, pptp, gre as standard.
● incorporate virtual router redundancy protocol (vrrp), facilitating 3g/4g wan backup services to existing fixed line routers, providing both wan and router redundancy to critical business applications.
● low-voltage, over current, over voltage, anti-reverse protection
● wide power input dc12-36v
● standard rs232/485 interface to connect with serial devices.
● router factory default settings can be configured freely.
● system logs can be viewed from local or remote.
●support wlan(1200mbps 802.11ac).
● support snmp v1/v2/v3.
● support ip, mac, url filtering
●nat and qos are supported
● support static, dynamic, and policy-based routing strategy
● leds for status monitoring (showing power, system, internet, vpn, signal strength).
● supports ntp client synchronization network time and provides ntp network time.